Palty high temperature neoprene glue spray 500ml

High-performance transparent neoprene adhesive for automotive, marine, furniture, industrial, and construction applications.
Recommended for assembling headliners, imitation leather, paneling and foam, plastics, fabrics, and more.

Heat-resistant up to 50°C, Palty adhesive is ideal for automotive and marine applications.
Prevents delamination due to high heat.

Directions for use:

Ready-to-use, this adhesive is easy to use thanks to its adjustable nozzle.
Use the adhesive in an environment around 20°C.
Shake the can before use.
Apply the adhesive to surfaces that have been previously degreased, dust-free, and dried.
If you have used solvent-based products during surface preparation, allow the surface to air for 1 to 2 days before installation.
Double-coating is recommended. Let dry for about a minute, then apply glue.
Press evenly to adhere.
Be careful with foamed fabrics: press gently, smoothing with your hands to avoid crushing the foam.

To dilute the glue and wash tools, use neoprene or acetone thinner or fuel.
Store the glue in a ventilated area, away from sunlight, at room temperature <50°C.
Extremely flammable. Keep out of reach of children and all sources of heat, flames, or sparks.
The spray is a pressurized container; do not burn or pierce, even after use.
Always use protective equipment when handling the glue: clothing, a mask, goggles, and gloves.

Also discover our wide range of glues and brushes.

Any doubts? Any questions? Contact us!